banner
blog
  • How to install solar panel on Metal Roof Sheet
    How to install solar panel on Metal Roof Sheet Apr 09, 2024
    How to install solar panel on Metal Roof Sheet   Metal Roof is one of the common roofs in life. It is commonly used in relatively large buildings such as factories and warehouses. This roof is also applied in family houses. How to install solar components safely on this roof is one of the important issues of photovoltaic support installation.   Metal Roof Sheet can be divided into Trapezoidal Root Sheet, Corrugated ROOF Sheet, Standing Seam ROOF Sheet, etc. We can adopt different solar bracket solutions according to its roof shape. Different shape installation methods are similar. Sometimes the same installation method is also suitable for different shapes of ROOF Sheet. Now we mainly discuss different installation methods with TRAPEZOIDAL ROOF Sheet:   1. Trapezoidal ROOF Sheet This roof can usually be connected to the metal roof with L feet. In order to prevent the waterproof, the EPDM rubber pads are needed to prevent water leakage. Sometimes in order to increase the distance between solar panel and roofs, we use the combination of L foot and Hanger Bolt to increase the height of the bracket to more effectively improve the heat dissipation of the component. The advantage of this installation method is that L feet can be more firmly connected to the purlins. It is suitable for areas with relatively large wind speeds. The scheme is as follows:   You can click the text on the right to get further information about this bracket: Trapezoidal ROOF L Feet Mounting Solutions.   In areas with relatively small wind speed (usually less than 25m/s), we can adopt simple and easy ways to install solar components. Generally, ROOF Attachments and Mini Rail, U Channel Clamp, etc.   As shown in the figure below, by making ROOF Attachments with the shape of TRAPEZOIDAL ROOF Sheet to connect roof sheet and components. Of course, this method must also consider waterproofing problems. It also combines rubber pads and ROOF Attachment.     You can click the text on the right to get further information about this bracket: Trapezoidal ROOF Attachment Mountain System   MINI RAIL and U Channel CLAMP installation method is a more common and simple way to install solar panels. MINI RAIL and U Channel CLAMP will have a predetermined hole to be installed quickly. The role of fast installation. The advantages of these two installation methods are simple, convenient, and low cost. As shown in the figure below:                                                                                   (MINI RAIL installation method) You can click the text on the right to get further information about this bracket: Mini Rail Mountain Solution                                                                                    (U Channel Clamp installation method) You can click the text on the right to get further information about this bracket: U Rail mounting solution   2, Corrugated ROOF Sheet The installation method of Corrugated ROOF Sheet is basically similar to the TRAPEZOIDAL ROOF Sheet. In a relatively large wind speed areas, we can use L Feet, L Feet +Hanger Bolt to achieve installation. You can also use the special ROOF Attachment +RAIL method to use it Installation, as shown below:   You can click the text on the right to get further information about this bracket: Corrugated ROOF MOUNTING SYSTEMS   Similarly, MINI RAIL and U Channel Clamp are also suitable for Corrugated ROOF Sheet, which are simple, flexible and easy to use.   3, Standing Seam ROOF Sheet  Standing SEAM ROOF Sheet Due to his structural characteristics, we usually purchase the ROOF Attachment method to achieve installation. The feature of this installation method is simple. There is no need to damage the roof and the cost is low. As shown below:   You can click the text on the right to get further information about this bracket: Standing Seam Metal ROOF MOUNTING SYSTEMS   In actual installation, there may be restrictions on different factors, such as wind and snow pressure, building structure, etc. We can adjust and redesigned the brackets according to the actual situation to achieve safe installation. 
  • Solar Panel Metal Roof Mounting System
    Solar Panel Metal Roof Mounting System Feb 28, 2023
    Landpower Solar Panel Metal Roof Solar Mounting System is engineered for the maximum flexibility possible in designing and planning for various Corrugated,Trapezoidal metal/pvc roof solar system installation. It is applicable to install the usual module to flush with the pitched roof. Using our innovative Rail and pre-assembled components like tilt-in T module, clamp kit and various holding devices (like hanger bolt and L bracket etc.) our Metal Roof Mounting makes the installation easy and quick to save your labor cost and time.TECHNICAL INFORMATIONInstall site :Pitched RoofTilt Angle :Flushed with the roof (10~60 deg)Building Height:20 mMax Wind Speed:<60m/sSnow Load:<1.4KN/m2Standard :AS/NZS 1170 and other international StandardMaterial :High Class Aluminum alloy Al6005-T5& Stainless steel 304Color: Natural or CustomizedAnticorrosive: anodized aluminum & stainless steelWarranty:Ten years warranty and twenty- year service life COMPONENT OVERVIEW Landpower carries various Components for various Corrugated,Trapezoidal metal/pvc Roof Racking Systems, here are some main components:                                  Roof Rail                Thin Film Mid Clamp    Thin Film End Clamp         Mid Clamp            End Clamp                         Splice                              L- Feet                   Earthing Lug              Earthing Clip                 Cable Clip   Note: The component is not limited as above, we carry high range of various Corrugated,Trapezoidal metal/pvc roof racking component for various metal roof,if you can't find components above,please feel free to contact us for more details.   ROOF FIXINGS Landpower design and produce various roof clamp and fixings for various Corrugated,Trapezoidal metal/pvc roof, if you have specific metal/pvc roof shape, feel free to contact us, we are here to make customized solutions for you.                                 GROUNDING SYSTEMS The grounding systems include components like earthing lug, earthing clip and bonding jumper etc which makes the solar array more safe.   BENEFITS 1,Fast Installation.The tilt-in T module can be put into the extruded rail from the any location and can be highly pre-assembled with the clamp and roof hook to guarantee a fast and easy installation process.2, Flexible ApplicationThe high range of engineered holding devices ensure the mounting structure accommodate most of trapezoidal sheet metal roofs. Both crystalline module and thin film module can easily be installed on most kind of metal roofs in landscape or portrait.3, EconomicalThe mounting structure is a cost effective mounting solution. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.4, Long lifespan: All mounting structural components are made of high class stainless steel and anodized aluminum alloy, their high resistance to corrosion and they are designed for twenty-year service life and backed by ten years warranty. Project Reference(click here): Landpower PVC Corrugated Roof MW Project.   We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.
  • Angle Adjustable Tilt Solar Mounting
    Angle Adjustable Tilt Solar Mounting Jun 01, 2023
    Angle Adjustable Tilt Solar Racking System is specially designed for easy installation of solar panel to tilt a certain angle with the roof. The mounting system design provides a strong and sturdy support for solar modules, it can be a fixed angle or adjustable such as 10~15 degree, 15~30 degree and 30~60 degree for your requirement. Using our innovative Rail and pre-assembled components like tilt-in T module, clamp kit and highly pre-assembled tilt leg, This Metal Adjustable Tilt Solar Mounting makes the installation easy and quick to save your labor cost and time.TECHNICAL INFORMATIONInstall site :Low profile Roof or flat roofTilt Angle :10~60 degreeBuilding Height:20 mMax Wind Speed:<60m/sSnow Load:<1.4KN/m2Standard :AS/NZS 1170 and other international StandardMaterial :High Class Aluminum alloy Al6005-T5& Stainless steel 304Anticorrosive: Anodized aluminum & stainless steelColor: Natural and CustomizedWarranty:Ten years warranty and twenty years’ service life   COMPONENT OVERVIEW Landpower carries many Components for Adjustable Tilt Solar Racking solutions,here are some main components: Overview Components                                                   Roof Rail                       Mid Clamp                End Clamp                    Front Foot            Adjustable Rear Foot   INSTALLATION DEMONSTRATION     Please click Landpower Adjustable Tilt Solar Mounting for concrete project for your reference!!! BENEFITS 1, Fast InstallationThe tilt-in T module can be put into the extruded rail from the any location and can be highly pre-assembled with the clamp and tilt leg to ensure a fast and easy installation process.2, Flexible ApplicationWith adjustable tilt angles from 10°-60° this mounting system can easily tilt a ideal certain angle with roof, it provides excellent adaptability not only to a wide range of flat roof PV mounting projects but also some sloped roof solar mounting projects.3, EconomicalThe mounting structure is a cost effective mounting solution. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.4, Long lifespan All mounting structural components are made of high class stainless steel and anodized aluminum alloy, their high resistance to corrosion and they are designed for twenty-year service life and backed by ten years warranty. We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.
  • Shingle Roof Solar Mounting-PV Flashing
    Shingle Roof Solar Mounting-PV Flashing Jun 01, 2023
    Landpower Shingle Roof Solar Mounting System is especially engineered for asphalt shingle roof. It highlight the component of universal PV Roof Flashing which is water tight and durable and compatible for most of roof racking. Using our innovative Rail and pre-assembled components like tilt-in T module, clamp kit and PV mount flashing, our Shingle Roof Mounting is not only making the module installation easy and save time but also minimizing damage to the roof.  TECHNICAL INFORMATIONInstall site :Shingle Roof                                           Tilt Angle :Flushed with the roof (10~60 deg)Building Height:20 mMax Wind Speed:<60m/sSnow Load:<1.4KN/m2Standard :AS/NZS 1170 and other international StandardMaterial :High Class Aluminum alloy Al6005-T5& Stainless steel 304Color: Natural or CustomizedAnticorrosive: anodized aluminum & stainless steel Warranty:Ten years warranty and twenty- year service life COMPONENT OVERVIEW Our PV Flashing is engineered and designed for fast installation. it is water tight and durable for any composite. This PV Flashing kit is compatible for most of solar racking, the main components are below:                                         PV Flashing                           AL Base               L-Bracket           Standoff               Hex Cap          Lag Bolt BENEFITS1, Fast InstallationComing with PV mount flashing, there’s no need for trimming shingles, just drill one hole into rafter backfilling sealant and slide the PV flashing beneath shingle, drive the bolt home, and it is done. The tilt-in T module can be put into the extruded rail from the any location and can be highly pre-assembled with the clamp and L bracket to guarantee a fast and easy installation process.2, Save ApplicationEquip with PV flash, there's no shingle cutting and no shingle distortion caused by trying to force a fit. Just a permanent, watertight mount every time!3, EconomicalThe mounting structure is a cost effective mounting solution. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.4, Long lifespan All mounting structural components are made of high class stainless steel and anodized aluminum alloy, their high resistance to corrosion and they are designed for twenty-year service life and backed by ten years warranty.   We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.
  • Trapezoidal Metal Roof Mounting
    Trapezoidal Metal Roof Mounting Jun 01, 2023
    Landpower Trapezoidal Roof Mounting is designed for Trapezoidal Sheet metal Roof, we are offering various mounting solutons for different condictions, L Bractet or hager bolt for metal and wooden purlins, Mini rail or U rail for lower wind locations installation, Trapezoidal Roof clamping systems for windy and water-proof  installations.We design specific solutions based on solar panel orientaion,wind load/snow load, roof conditions etc our concept is to design most suitable solutions for your Trapezoidal Roof. TECHNICAL INFORMATIONInstall site :Trapezoidal Sheet MetalTilt Angle :Flushed with the roof (10~60 deg)Building Height:20 mMax Wind Speed:<60m/sSnow Load:<1.4KN/m2Standard :AS/NZS 1170 and other international StandardMaterial :High Class Aluminum alloy Al6005-T5& Stainless steel 304Color: Natural or CustomizedAnticorrosive: anodized aluminum & stainless steelWarranty:Ten years warranty and twenty- year service life   Landpower Trapezoidal Roof Mounting are suiable for below roof sheet:     To know which solutions better to your trapezoidal  metal sheet roof, it is better to let us know above information of A,B,C and Points.We design vaious trapezoidal roof attachments,please feel free to email  us your roof infomatin.   Trapezoidal Roof Clamping Systems:                                                                  (Stainless Steel Clamping Systems)                                                                  (Aluminium Clamping Systems)   Trapezoidal Roof L-Feet(L-Bracket) and Hanger Bolt Systems:                                                                    (L feet and Hanger Bolt Systems)   Trapezoidal Roof Mounting --Mini Rail Systems                                 (Mini Rail Mounting Systems,mostly suitable for Portrait Orientation)   Trapezoidal Roof Mounting --U Rail Systems                                         (U Rail Mounting Systems,mostly suitable for Landscape Orientation)   Project Reference(click here): Landpower Trapezoidal Sheet Metal Roof MW Project   We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.
  • Mini Rail Roof Mounting
    Mini Rail Roof Mounting Jun 01, 2023
    Landpower Mini Rail Trapezoidal Roof Mounting is specially designed for solar panel portrait orientation installation in lower wind load location. It just consists of three components Mid Clamp,End Clamp, and Mini Rail , it is economic and simple solution for Trapezoidal sheet metal roofs. TECHNICAL INFORMATIONInstall site :Trapezoidal Sheet MetalTilt Angle :Flushed with the roof (10~60 deg)Building Height:20 mMax Wind Speed:<60m/sSnow Load:<1.4KN/m2Standard :AS/NZS 1170 and other international StandardMaterial :High Class Aluminum alloy Al6005-T5& Stainless steel 304Color: Natural or CustomizedAnticorrosive: anodized aluminum & stainless steelWarranty:Ten years warranty and twenty- year service life     Landpower Trapezoidal Roof Mounting are suiable for below roof sheet:     Mini Rail is easy to fix on roof, the length of  Mini Rail depends on the distance between ridges, therefore,it is better to let us know information of D Points.     INSTALLATION:                   We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.
  • Corrugated Roof Solar Mounting
    Corrugated Roof Solar Mounting Jun 01, 2023
    Landpower Corrugated Roof Mounting designed for corrugated steel roof sheet or corrugated fibre cement roof, we offer various mounting solutions for corrugated roof both railling system and rail-less systems. We design specially base clamp for the roofs, and L feet bracking with corrugated shape and hanger bolt for the roof, we have mini rail(rail-less) for both landscape and portrait layout installation. TECHNICAL INFORMATIONInstall site :Corrugated RoofTilt Angle :Flushed with the roof (10~60 deg)Building Height:20 mMax Wind Speed:<60m/sSnow Load:<1.4KN/m2Standard :AS/NZS 1170 and other international StandardMaterial :High Class Aluminum alloy Al6005-T5& Stainless steel 304Color: Natural or CustomizedAnticorrosive: anodized aluminum & stainless steelWarranty:Ten years warranty and twenty- year service life Landpower Corrugated Roof Mounting are suiable for below roof sheet:       We design vaious Corrugated roof attachments,please feel free to email  us your roof infomatin.     Corrugated Roof Optional Solutions                                                                   (Base Clamp Corrugated Roof Solutions)                                                                 (L-Feet Corrugated Roof Solutions)                                                                      (Hanger Bolt-L feet Corrugated Roof Solutions)     Project Reference(click here): Landpower PVC Corrugated Roof MW Project.     We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.
  • Ballasted Flat Roof Portrait Solar Mounting
    Ballasted Flat Roof Portrait Solar Mounting Jun 01, 2023
    Landpower Pre-assembled Portrait Ballasted Mounting is applicable to install module to tilt a certain angle with the roof. The Solar Racking System can be pre-designed in a fixed angle for your request and  the support is high pre-assembled,especially,this racking system highlights the function that it can be used as ballasted system by adding tray on the bottom tube,it is can be fix directly on the concrete block.The special extruded aluminum rail,the tilt-in module,the clamp kit and the round let can be high pre-assembly and make the installation easy and quick to save your labor cost and time. TECHNICAL INFORMATION     Install site :Low profile Roof or flat roofTilt Angle :10~30 deg (fixed)Building Height:20 mMax Wind Speed:<60m/sSnow Load:<1.4KN/m2Standard :AS/NZS 1170 and other international StandardMaterial :High Class Aluminum alloy Al6005-T5& Stainless steel 304Anticorrosive: Anodized aluminum & stainless steelColor: Natural and CustomizedWarranty:Ten years warranty and twenty years service life.   COMPONENT OVERVIEW   Landpower carries many Components for flat roof fixed racking systems,here are some main components:                              Roof Rail                Mid Clamp        End Clamp    Rail Clamp               Pre-assembled Support     ASSEMBLY OF FLAT RACKING   There are just few steps to assembly this solar racking systems. The support is pre-assembled, just open it, fix the upper tubes,clamp the rail and place the solar modules,then the job is finished.     FOUNDATION OPTIONS OF RACKING It is flexible on foundation option for this racking systems, you can install them on concrete block, I beam steel or install them by using ballasted objects.                     I BEAM APPLICATION      BENEFITS   1,Fast Installation. The Support is pre-assembled,just open it and fix the rail,four steps finish the installations.In addition,The tilt-in module can be put into the extruded rail from the any location and can be high pre-assembled with the clamp.All these minimizes the time and cost of installation.   2,Offer Unmatched Durability: with all structural components comprised of high class stainless steel and anodized aluminum alloy, it is designed for twenty years service life and backed by ten years warranty.   3,Stand up to extreme weather. The Landpower this Solar Racking System is designed to stand up to the extreme weather complied with the AS/NZS 1170 and other international structure load standard by the skilled engineer.The main support components also have been test to guaranty its structure and load-carrying capacity.   4,Provide Broad Installation Flexibility. These Racking Systems accommodate most of commercially available solar panels and diverse roof types,and they can scale easily from small to large,multi-megawatt installations.   We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.
  • Adjustable Triangle Flat Roof Solar Mounting
    Adjustable Triangle Flat Roof Solar Mounting Jun 01, 2023
    Adjustable Triangle Solar Racking System is specially designed for easy installation of solar panel to tilt a certain angle with flat roof. The mounting system design provides a strong and sturdy support for solar modules, it can be a fixed angle or adjustable such as 10~15 degree, 15~30 degree and 30~60 degree for your requirement. Using our innovative Rail and pre-assembled components like tilt-in T module, clamp kit and highly pre-assembled tilt leg, This Metal Adjustable Tilt Solar Mounting makes the installation easy and quick to save your labor cost and time.TECHNICAL INFORMATIONInstall site :Low profile Roof or flat roofTilt Angle :10~60 degreeBuilding Height:20 mMax Wind Speed:<60m/sSnow Load:<1.4KN/m2Standard :AS/NZS 1170 and other international StandardMaterial :High Class Aluminum alloy Al6005-T5& Stainless steel 304Anticorrosive: Anodized aluminum & stainless steelColor: Natural and CustomizedWarranty:Ten years warranty and twenty years’ service life     COMPONENT OVERVIEW   Landpower carries many Components for Adjustable Tilt Solar Racking solutions,here are some main components:               EASY INSTALLATION (ADJUSTABLE TRIANGLE SUPPORT)    Our specially design making the legs are adjustable and it come with pre-assembled. Save your installation time!!!       FOUNDATION OPTIONS                  BENEFITS1, Fast InstallationThe tilt-in T module can be put into the extruded rail from the any location and can be highly pre-assembled with the clamp and tilt leg to ensure a fast and easy installation process.2, Flexible ApplicationWith adjustable tilt angles from 10°-60° this mounting system can easily tilt a ideal certain angle with roof, it provides excellent adaptability not only to a wide range of flat roof PV mounting projects but also some sloped roof solar mounting projects.3, EconomicalThe mounting structure is a cost effective mounting solution. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.4, Long lifespan All mounting structural components are made of high class stainless steel and anodized aluminum alloy, their high resistance to corrosion and they are designed for twenty-year service life and backed by ten years warranty.   We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.  
  • Ballasted Flat Roof Mounting System
    Ballasted Flat Roof Mounting System Jun 05, 2023
    Landpower Landscape Ballasted Solar Mounting is applicable to large scale flat roof module installation. It allow solar array to tilt angle 5-30 deg with the roof. The solar racking system can be pre-designed a  fixed angle for your request and the support is high Pre-assembled, especially, this system highlights  the function that it can be both use as ballasted system by adding tray on the bottom tube,and be fixed  directly on the concrete block. The special extruded aluminum rail, the tilt-in module, the clamp kit  and the round leg can be high pre-assembly and make the installation easy and quick to save your labor cost and time.   TECHNICAL INFORMATION Install site :Low profile Roof or flat roofTilt Angle :5~30 deg (fixed)Building Height:20 mMax Wind Speed:<60m/sSnow Load:<1.4KN/m2Standard :AS/NZS 1170 and other international StandardMaterial :High Class Aluminum alloy Al6005-T5& Stainless steel 304Anticorrosive: Anodized aluminum & stainless steelColor: Natural and CustomizedWarranty:Ten years warranty and twenty years service life   COMPONENT OVERVIEW   There are just three main components for this Non Penetration Racking Systems ,quite easy to install, save cost :                                  Pre-assembled Support                            Connection Tube                                      End Clamp          ASSEMBLY OF FLAT RACKING   There are just few steps to assembly this solar racking systems. The support is pre-assembled, just open it, fix the upper tubes,clamp the rail and place the solar modules,then the job is finished.   FOUNDATION OPTIONS OF RACKING   It is flexible on foundation option for this racking systems, you can install them on concrete block, I beam steel or install them by using ballasted objects.             BENEFITS   1,Fast Installation. The Support is pre-assembled,just open it and fix the rail,four steps finish the installations.In addition,The tilt-in module can be put into the extruded rail from the any location and can be high pre-assembled with the clamp.All these minimizes the time and cost of installation.   2,Offer Unmatched Durability: with all structural components comprised of high class stainless steel and anodized aluminum alloy, it is designed for twenty years service life and backed by ten years warranty.   3,Stand up to extreme weather. The Landpower this Solar Racking System is designed to stand up to the extreme weather complied with the AS/NZS 1170 and other international structure load standard by the skilled engineer.The main support components also have been test to guaranty its structure and load-carrying capacity.   4,Provide Broad Installation Flexibility. These Racking Systems accommodate most of commercially available solar panels and diverse roof types,and they can scale easily from small to large,multi-megawatt installations.   DEMONSTRATION   Ballasted System without Base Rail: Ballasted System with Base Rail:         INSTALLATION VIDEO     INSTALLATION VIDEO--with wind deflector&ballasted plate   We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.
  • Adjustable Triangle Landscape Flat Roof Mounting
    Adjustable Triangle Landscape Flat Roof Mounting Jun 05, 2023
    Landpower Adjustable Triangle Landscape Solar Racking System is specially designed for easy installation of solar panel to tilt a certain angle with flat roof. The mounting system design provides a strong and sturdy support for solar modules, it can be adjustable angle such as 10~17 degree, 17~30 degree and 30~60 degree for your requirement. Using our innovative Rail and pre-assembled components like tilt-in T module, clamp kit and highly pre-assembled Triangle Tripod, this Adjustable Triangle Roof Mounting makes the installation easy and quick to save your labor cost and time.TECHNICAL INFORMATIONInstall site  Flat roof or lower profile roofTilt Angle :10~60 degreeBuilding Height:20 mMax Wind Speed:<60m/sSnow Load:<1.4KN/m2Standard :AS/NZS 1170 and other international StandardMaterial :High Class Aluminum alloy Al6005-T5& Stainless steel 304Anticorrosive: Anodized aluminum & stainless steelColor: Natural and CustomizedWarranty:Ten years warranty and twenty years’ service life     COMPONENT OVERVIEW Landpower carries many Components for Adjustable Triangle Solar Mounting solutions,here are some main components:                 EASY INSTALLATION (ADJUSTABLE TRIANGLE SUPPORT)    Our specially design making the legs are adjustable and it come with pre-assembled. Save your installation time!!!     FOUNDATION OPTIONS                BENEFITS1, Fast InstallationThe tilt-in T module can be put into the extruded rail from the any location and can be highly pre-assembled with the clamp and tilt leg to ensure a fast and easy installation process.2, Flexible ApplicationWith adjustable tilt angles from 10°-60° this mounting system can easily tilt a ideal certain angle with roof, it provides excellent adaptability not only to a wide range of flat roof PV mounting projects but also some sloped roof solar mounting projects.3, EconomicalThe mounting structure is a cost effective mounting solution. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.4, Long lifespan All mounting structural components are made of high class stainless steel and anodized aluminum alloy, their high resistance to corrosion and they are designed for twenty-year service life and backed by ten years warranty.     INSTALLATION VIDEO We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.
  • East West Ballasted Flat Roof Mounting
    East West Ballasted Flat Roof Mounting Jun 05, 2023
    Landpower EAST/West Ballasted Roof Solar Mounting System is specifically engineered for non-penetration roofs, which secures the array without damaging the flat roof. It is compatible with both framed photovoltaic modules and unframed thin film modules. This economical system requires no roof penetration and made from lightweight and strong aluminum construction and come with pre-assembled components, they are just require few tools, it is quick and easy to install.TECHNICAL INFORMATIONInstall site :Flat RoofTilt Angle : 5-10degModule Orientation: LandscapeBuilding Height:<20 mMax Wind Speed:<60m/sSnow Load:<1.4KN/m2Distributed weight: 10~25 kg/m2Standard :AS/NZS 1170 and other international StandardMaterial :High Class Aluminum alloy Al6005-T5& Stainless steel fastenColor: Natural Warranty:Ten years warranty and twenty years’ service life.   APPLICATION   BENEFITS1, Minimize Roof Space LimitationThe double-sided design of this ballasted mounting system let the solar module mounted in “shoulder by shoulder” which maximize roof arrays due to no shading spaces, therefore it optimize high power production.2, Minimize Orientation LimitationIt is specially engineered with double-sided configuration to ensure solar module   to expose sunshine as long as possible in any directions. It’s suitable for all orientations installations.3, Fast InstallationIt is highly engineered and simplified ballasted mounting system, which   reduced number of components without module carrier rail, just direct clamping with ballasted base and tighten the bolts, everything is been done.4, EconomicalThe mounting structure is a cost effective mounting solution. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.5, Long lifespan All mounting structural components are made of high class stainless steel and anodized aluminum alloy, their high resistance to corrosion and complete recyclability, they are designed for twenty-year service life and backed by ten years warranty.   INSTALLATION VIDEO       Project Reference(click here): Landpower East/West Flat Roof MW Project.   Landpower is leading manufacturer of solar mounting in China, We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.
1 2 3

A total of3pages

get the latest subscribe for newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit

leave message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
see more

Our hours

Mon 11/21 - Wed 11/23: 9 AM - 8 PM
Thu 11/24: closed - Happy Thanksgiving!
Fri 11/25: 8 AM - 10 PM
Sat 11/26 - Sun 11/27: 10 AM - 9 PM
(all hours are Eastern Time)

Lunes 11/21 a miercoles 11/23: 9 AM - 7 PM
Jueves 11/24: serados
Viernes 11/25: 9 AM - 10 PM
Sábado 11/26 a domingo 11/27: 10 AM - 7 PM
(hora del Este) Estamos disponibles 6 días a la semana

Contact us #
+86 -592-6212776

home

products

whatsApp

Contact us