Portrait Ballasted Mounting

Landpower Pre-assembled Portrait Ballasted Mounting is applicable to install module to tilt a certain angle with the roof. The Solar Racking System can be pre-designed in a fixed angle for your request and  the support is high pre-assembled,especially,this racking system highlights the function that it can be used as ballasted system by adding tray on the bottom tube,it is can be fix directly on the concrete block.The special extruded aluminum rail,the tilt-in module,the clamp kit and the round let can be high pre-assembly and make the installation easy and quick to save your labor cost and time.


TECHNICAL INFORMATION


Install site Low profile Roof or flat roof
Tilt Angle 10~30 deg (fixed)
Building Height20 m
Max Wind Speed<60m/s
Snow Load<1.4KN/m2
Standard AS/NZS 1170 and other international Standard
Material High Class Aluminum alloy Al6005-T5& Stainless steel 304
Anticorrosive: Anodized aluminum & stainless steel
Color: Natural and Customized
WarrantyTen years warranty and twenty years service life.



COMPONENT OVERVIEW


Landpower carries many Components for flat roof fixed racking systems,here are some main components:


                          

      Roof Rail                   Mid Clamp               End Clamp                 Rail Clamp               Pre-assembled Support



ASSEMBLY OF FLAT RACKING


There are just few steps to assembly this solar racking systems. The support is pre-assembled, just open it, fix the upper tubes,clamp the rail and place the solar modules,then the job is finished.




FOUNDATION OPTIONS OF RACKING


It is flexible on foundation option for this racking systems, you can install them on concrete block, I beam steel or install them by using ballasted objects.


               


I BEAM APPLICATION   



BENEFITS


1,Fast Installation. The Support is pre-assembled,just open it and fix the rail,four steps finish the installations.In addition,The tilt-in module can be put into the extruded rail from the any location and can be high pre-assembled with the clamp.All these minimizes the time and cost of installation.


2,Offer Unmatched Durability: with all structural components comprised of high class stainless steel and anodized aluminum alloy, it is designed for twenty years service life and backed by ten years warranty.


3,Stand up to extreme weather. The Landpower this Solar Racking System is designed to stand up to the extreme weather complied with the AS/NZS 1170 and other international structure load standard by the skilled engineer.The main support components also have been test to guaranty its structure and load-carrying capacity.


4,Provide Broad Installation Flexibility. These Racking Systems accommodate most of commercially available solar panels and diverse roof types,and they can scale easily from small to large,multi-megawatt installations.



INSTALLATION VIDEO



We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.

More >>

Adjustable Portrait Mounting

Adjustable Triangle Solar Racking System is specially designed for easy installation of solar panel to tilt a certain angle with flat roof. The mounting system design provides a strong and sturdy support for solar modules, it can be a fixed angle or adjustable such as 10~15 degree, 15~30 degree and 30~60 degree for your requirement. Using our innovative Rail and pre-assembled components like tilt-in T module, clamp kit and highly pre-assembled tilt leg, This Metal Adjustable Tilt Solar Mounting makes the installation easy and quick to save your labor cost and time.

TECHNICAL INFORMATION
Install site :Low profile Roof or flat roof
Tilt Angle :10~60 degree
Building Height:20 m
Max Wind Speed:<60m/s
Snow Load:<1.4KN/m2
Standard :AS/NZS 1170 and other international Standard
Material :High Class Aluminum alloy Al6005-T5& Stainless steel 304
Anticorrosive: Anodized aluminum & stainless steel
Color: Natural and Customized
Warranty:Ten years warranty and twenty years’ service life



COMPONENT OVERVIEW


Landpower carries many Components for Adjustable Tilt Solar Racking solutions,here are some main components:





               

EASY INSTALLATION (ADJUSTABLE TRIANGLE SUPPORT) 


Our specially design making the legs are adjustable and it come with pre-assembled. Save your installation time!!!





FOUNDATION OPTIONS      


        

BENEFITS
1, Fast Installation

The tilt-in T module can be put into the extruded rail from the any location and can be highly pre-assembled with the clamp and tilt leg to ensure a fast and easy installation process.
2, Flexible Application
With adjustable tilt angles from 10°-60° this mounting system can easily tilt a ideal certain angle with roof, it provides excellent adaptability not only to a wide range of flat roof PV mounting projects but also some sloped roof solar mounting projects.
3, Economical
The mounting structure is a cost effective mounting solution. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.
4, Long lifespan

All mounting structural components are made of high class stainless steel and anodized aluminum alloy, their high resistance to corrosion and they are designed for twenty-year service life and backed by ten years warranty.



INSTALLATION VIDEO



We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the
details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.


More >>

Landscape Ballasted Mounting

Landpower Landscape Ballasted Solar Mounting is applicable to large scale flat roof module installation.

It allow solar array to tilt angle 5-30 deg with the roof. The solar racking system can be pre-designed a 

fixed angle for your request and the support is high Pre-assembled, especially, this system highlights 

the function that it can be both use as ballasted system by adding tray on the bottom tube,and be fixed 

directly on the concrete block. The special extruded aluminum rail, the tilt-in module, the clamp kit 

and the round leg can be high pre-assembly and make the installation easy and quick to save your

labor cost and time.

 

TECHNICAL INFORMATION

Install site Low profile Roof or flat roof
Tilt Angle 5~30 deg (fixed)
Building Height20 m
Max Wind Speed<60m/s
Snow Load<1.4KN/m2
Standard AS/NZS 1170 and other international Standard
Material High Class Aluminum alloy Al6005-T5& Stainless steel 304
Anticorrosive: Anodized aluminum & stainless steel
Color: Natural and Customized
WarrantyTen years warranty and twenty years service life


COMPONENT OVERVIEW


There are just three main components for this Non Penetration Racking Systems ,quite easy to install, save cost :


                 

             Pre-assembled Support                            Connection Tube                                      End Clamp     



ASSEMBLY OF FLAT RACKING


There are just few steps to assembly this solar racking systems. The support is pre-assembled, just open it, fix the upper tubes,clamp the rail and place the solar modules,then the job is finished.




FOUNDATION OPTIONS OF RACKING


It is flexible on foundation option for this racking systems, you can install them on concrete block, I beam steel or install them by using ballasted objects.



  

          


BENEFITS


1,Fast Installation. The Support is pre-assembled,just open it and fix the rail,four steps finish the installations.In addition,The tilt-in module can be put into the extruded rail from the any location and can be high pre-assembled with the clamp.All these minimizes the time and cost of installation.


2,Offer Unmatched Durability: with all structural components comprised of high class stainless steel and anodized aluminum alloy, it is designed for twenty years service life and backed by ten years warranty.


3,Stand up to extreme weather. The Landpower this Solar Racking System is designed to stand up to the extreme weather complied with the AS/NZS 1170 and other international structure load standard by the skilled engineer.The main support components also have been test to guaranty its structure and load-carrying capacity.


4,Provide Broad Installation Flexibility. These Racking Systems accommodate most of commercially available solar panels and diverse roof types,and they can scale easily from small to large,multi-megawatt installations.



DEMONSTRATION


Ballasted System without Base Rail:



Ballasted System with Base Rail:










INSTALLATION VIDEO





INSTALLATION VIDEO--with wind deflector&ballasted plate



We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.

More >>

Adjustable Landscape Mounting

Landpower Adjustable Triangle Landscape Solar Racking System is specially designed for easy installation of solar panel to tilt a certain angle with flat roof. The mounting system design provides a strong and sturdy support for solar modules, it can be adjustable angle such as 10~17 degree, 17~30 degree and 30~60 degree for your requirement. Using our innovative Rail and pre-assembled components like tilt-in T module, clamp kit and highly pre-assembled Triangle Tripod, this Adjustable Triangle Roof Mounting makes the installation easy and quick to save your labor cost and time.

TECHNICAL INFORMATION
Install site  Flat roof or lower profile roof
Tilt Angle :10~60 degree
Building Height:20 m
Max Wind Speed:<60m/s
Snow Load:<1.4KN/m2
Standard :AS/NZS 1170 and other international Standard
Material :High Class Aluminum alloy Al6005-T5& Stainless steel 304
Anticorrosive: Anodized aluminum & stainless steel
Color: Natural and Customized
Warranty:Ten years warranty and twenty years’ service life



COMPONENT OVERVIEW


Landpower carries many Components for Adjustable Triangle Solar Mounting solutions,here are some main components:





               

EASY INSTALLATION (ADJUSTABLE TRIANGLE SUPPORT) 


Our specially design making the legs are adjustable and it come with pre-assembled. Save your installation time!!!





FOUNDATION OPTIONS      


        

BENEFITS
1, Fast Installation

The tilt-in T module can be put into the extruded rail from the any location and can be highly pre-assembled with the clamp and tilt leg to ensure a fast and easy installation process.
2, Flexible Application
With adjustable tilt angles from 10°-60° this mounting system can easily tilt a ideal certain angle with roof, it provides excellent adaptability not only to a wide range of flat roof PV mounting projects but also some sloped roof solar mounting projects.
3, Economical
The mounting structure is a cost effective mounting solution. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.
4, Long lifespan

All mounting structural components are made of high class stainless steel and anodized aluminum alloy, their high resistance to corrosion and they are designed for twenty-year service life and backed by ten years warranty.





INSTALLATION VIDEO



We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the
details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.
More >>

East/West Ballasted Mounting

Landpower EAST/West Ballasted Roof Solar Mounting System is specifically engineered for non-penetration roofs, which secures the array without damaging the flat roof. It is compatible with both framed photovoltaic modules and unframed thin film modules. This economical system requires no roof penetration and made from lightweight and strong aluminum construction and come with pre-assembled components, they are just require few tools, it is quick and easy to install.

TECHNICAL INFORMATION

Install site :Flat Roof
Tilt Angle : 5-10deg
Module Orientation: Landscape
Building Height:<20 m
Max Wind Speed:<60m/s
Snow Load:<1.4KN/m2
Distributed weight: 10~25 kg/m2
Standard :AS/NZS 1170 and other international Standard
Material :High Class Aluminum alloy Al6005-T5& Stainless steel fasten
Color: Natural

Warranty:Ten years warranty and twenty years’ service life.


APPLICATION





BENEFITS
1, Minimize Roof Space Limitation

The double-sided design of this ballasted mounting system let the solar module mounted in “shoulder by shoulder” which maximize roof arrays due to no shading spaces, therefore it optimize high power production.
2, Minimize Orientation Limitation
It is specially engineered with double-sided configuration to ensure solar module   to expose sunshine as long as possible in any directions. It’s suitable for all orientations installations.
3, Fast Installation
It is highly engineered and simplified ballasted mounting system, which   reduced number of components without module carrier rail, just direct clamping with ballasted base and tighten the bolts, everything is been done.
4, Economical
The mounting structure is a cost effective mounting solution. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.
5, Long lifespan

All mounting structural components are made of high class stainless steel and anodized aluminum alloy, their high resistance to corrosion and complete recyclability, they are designed for twenty-year service life and backed by ten years warranty.



INSTALLATION VIDEO



Project Reference(click here): Landpower East/West Flat Roof MW Project.


Landpower is leading manufacturer of solar mounting in China, We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the
details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.

More >>

Two Row Landscape Mounting

Landpower Two-Row Landscape Flat Roof Solar Mounting is applicable to large scale flat roof,or low       

profile Trapezoidal and Corrugated metal roof  module installation. It allow solar array to tilt angle 5-30 deg 

with the roof. The solar racking system can be pre-designed a fixed angle for your request and the support 

is high Pre-assembled, especially, this system highlights the function that it can be both use as ballasted  

system by adding tray on the bottom tube,and be fixeddirectly on the concrete block. The special extruded  

aluminum rail, the tilt-in module, the clamp kitand the round leg can be high pre-assembly and make the 

installation easy and quick to save your labor cost and time.

 

TECHNICAL INFORMATION

Install site Low profile Roof or flat roof
Tilt Angle 5~30 deg (fixed)
Building Height20 m
Max Wind Speed<60m/s
Snow Load<1.4KN/m2
Standard AS/NZS 1170 and other international Standard
Material High Class Aluminum alloy Al6005-T5& Stainless steel 304
Anticorrosive: Anodized aluminum & stainless steel
Color: Natural and Customized
WarrantyTen years warranty and twenty years service life


COMPONENT OVERVIEW


There are just three main components for this Non Penetration Racking Systems ,quite easy to install, save cost :


                 

             Pre-assembled Support                            Connection Tube                                      End Clamp     



ASSEMBLY OF FLAT RACKING


There are just few steps to assembly this solar racking systems. The support is pre-assembled, just open it, fix the upper tubes,clamp the rail and place the solar modules,then the job is finished.




FOUNDATION OPTIONS OF RACKING


It is flexible on foundation option for this racking systems, you can install them on concrete block, I beam steel or install them by using ballasted objects.



  

          


BENEFITS


1,Fast Installation. The Support is pre-assembled,just open it and fix the rail,four steps finish the installations.In addition,The tilt-in module can be put into the extruded rail from the any location and can be high pre-assembled with the clamp.All these minimizes the time and cost of installation.


2,Offer Unmatched Durability: with all structural components comprised of high class stainless steel and anodized aluminum alloy, it is designed for twenty years service life and backed by ten years warranty.


3,Stand up to extreme weather. The Landpower this Solar Racking System is designed to stand up to the extreme weather complied with the AS/NZS 1170 and other international structure load standard by the skilled engineer.The main support components also have been test to guaranty its structure and load-carrying capacity.


4,Provide Broad Installation Flexibility. These Racking Systems accommodate most of commercially available solar panels and diverse roof types,and they can scale easily from small to large,multi-megawatt installations.



DEMONSTRATION


Landscape with two row:





We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.

More >>

Interested?

Please don't hesitate to leave a message and we'll get back to you soon.


Required Fields *

First Name: *
Your name: *
Company:
Email: *
Phone: *
Address:
Content: *
ValidCode:
*